|
| |
- Round motor clamp which holds the motor
securely to eliminate vibration and assure maximum accuracy.
- Side arm for Com placement adjustment.
- Cuts any stock style motor
- Accurate within .0002".
- Anodized to eliminate oxidation/corrosion.
- Upper handle calibrated in .001" for
easy depth adjustment.
- Wide base for added stability
- Base holds power cells with charging jacks.
(Power Base unit only.)
- Minimal assembly
- Easy, adjustable cutting stop
- Teflon way shims to assure the smoothest
possible operation.
- Lightweight and portable.
- Carbide cutting bit included.
- Increases motor life 3-4 times and improves
motor performance.
- Optional diamond cutting bit.
|
|
| Part No. |
Description |
List Price |
| Cobra
Stock Com Lathes |
| 2000K |
Stock Com Lathe complete |
$ 199.95 |
| 2000U |
Stock Com Lathe With Power
Base, complete |
$ 219.95 |
| 2000A |
Phenolic spacers for Stock
Com, 6 per pack |
$ 2.95 |
| 2000F |
Diamond cutting tool for Stock
Com |
$ 95.00 |
| 20001 |
Teflon Spacers, 4 per pack |
$ 3.95 |
| 2000J |
Side Arm |
$ 10.95 |
| 2000P |
Drive belt for Stock Com |
$ 2.95 |
| 2000T |
Stock to Modified conversion
kit |
$ 99.95 |
| 2000W |
Teflon Way Shims, 2 per pack |
$ 3.95 |
| 2000Z |
Replacement carbide cutting
tool for Stock Com |
$ 19.95 |
| 300 |
Drive pulley, small |
$ 4.95 |
| 300K |
Drive pulley, large |
$ 4.95 |
| *Drive motor
and motor not included ** Power cells not included |
- Accurate within .0002".
- Crank conveniently located opposite the
motor for better handling.
- Anodized to eliminate oxidation/corrosion.
- Upper handle calibrated in .001" for
easy depth adjustment
- Wide base for added stability
- Base holds power cells with charging jacks.
(Power Base unit only.)
- Minimal assembly
- Easy, adjustable cutting stop.
- Teflon way shims to assure the smoothest
possible operation.
- lightweight and portable.
- Carbide cutting bit included.
- Increases motor Life 3-4 times, improves
motor performance.
- Optional diamond cutting bit.
- *Also available - Adjustable base and 5mm
cradles for Plettenburg and other German motors.
|
|
| Part No |
Description |
List Price |
| Cobra Pro
Com Lathes |
| 2000 |
Pro Com Modified Com Lathe,
complete |
$ 169.95 |
| 2000L |
Pro Com Modified Com Lathe
with Power Base, complete |
$ 199.95 |
| 200LD |
Pro Com Lathe
w/Power Base & Diamond |
$ 299.95 |
| 200WD |
Pro Com Lathe
w/Diamond Bit |
$ 269.95 |
| 2000B |
Drive belt for Pro Com |
$ 2.95 |
| 2000C |
Replacement carbide cutting
tool for Pro Com |
$ 10.95 |
| 2000D |
Diamond cutting tool for Pro
Com |
$ 85.00 |
| 2000I |
Teflon Spacers, 4 per pack |
$ 3.95 |
| 2000M |
Modified to Stock conversion
kit |
$ 109.95 |
| 2000R |
Right Hand Diamond (for use
w/right hand lathes) |
$ 85.00 |
| 2000W |
Teflon Way Shims, 2 per pack |
$ 3.95 |
| 300 |
Drive Pulley |
$ 4.95 |
| *Drive motor
and motor not included **Power cells not included |
- 50% Wider ways for more rigidity and
stability during cutting.
- Hardened chromolly tool steel uprights for
infinite durability.
- Base holds power cells with charging jacks
(Power Base units only.)
- Accurate within .0001"
- Crank conveniently located opposite the
motor for better handling
- Anodized to eliminate oxidation/corrosion.
- Upper handle calibrated in .001" for
easy depth adjustment.
- Wide base for added stability.
- Minimal assembly.
- Teflon way shims to assure the smoothest
possible operation.
- lightweight and portable.
- Carbide cutting bit included.
- Increases motor life 3-4 times, improves
motor performance.
- Optional diamond cutting bit
- Billowed to keep shavings out.
|
|
| Part No |
Description |
List Price |
| Cobra
Motor Builder’s Lathe |
| 2000Q |
Motor Builder’s Lathe,
complete |
$ 299.95 |
| 2000D |
Diamond cutting tool for Motor
Builders Lathe |
$ 85.00 |
| 2000I |
Teflon Spacers, 4 per pack |
$ 3.95 |
| 2000P |
Drive belt for Motor Builders
Lathe |
$ 2.95 |
| 2000W |
Teflon Way Shims. 2 per pack. |
$ 3.95 |
| 2000C |
Replacement carbide cutting
tool for Motor Builders Lathe |
$ 10.95 |
| 300 |
Drive Pulley, Small |
$ 4.95 |
| 300K |
Drive Pulley, Large |
$ 4.95 |
| *Drive motor
and motor not included *Power cells not included |
- Semi automates your Commutator Lathe
- No more cranking. power feed automatically
trues the corns for you
- Perfect cuts every time.
- Variable Arm RPM, fine tune your Arm Speed
Rotation.
- Variable cutting speed. fine tune your
cutting speed.
- Digital Readout shows voltage going to each
slave motor to enable you to find the ideal cutting speed and Arm speed for the slave
motor:
- 15 amp variable source built in can be used
to break in motors, drive slave motors, etc.
- Works with most popular lathes.
- Requires 12 VDC source, 20 amp minimum and
ROAR 91 motor.
- Stock Lathe requires stock pulley handle,
sold separately
|
|
| Part No |
Description |
List Price |
| Cobra
Lathe Power Feed |
| 2101 |
Power Feed Complete. |
$ 249.95 |
| 2105 |
Stock Pulley Handle |
$ 12.95 |
| 2106 |
Drive Belt |
$ 3.95 |
| 2107 |
Internal Power Feed Belt |
$ 6.99 |
| 2108 |
Lathe Handle |
$ 9.95 |
| Does
not come with lathe or drive motors |
TEAM
COBRA VARI-DRIVE |
|
|
A NEW WAY TO RUN YOUR COM.
LATHE, NO BATTERIES TO CHARGE OR RUN LOW DURING A CUT.
- VARIABLE OUT PUT RANGES FROM 1-7 VDC
- UP TO 25 AMPS OF POWER
- VERY CONSISTENT SPEED DOES NOT VARY
- FITS UNDER ANY COM. LATHE, ( REALLY LIKES TEAM COBRA COM. LATHES, BUT
WILL WORK WITH ANY LATHE.
- MANY MORE USES, WILL BREAK IN BRUSHES MOTORS, RUN A TIRE TRUER, ETC.
- REQUIRES 12VDC POWER SUPPLY
|
| Part No |
Description |
List Price |
| Fabricating
Materials |
| 2000V |
Cobra Vari-Drive |
$150.00 |
Convert your
Cobra Com Lathe to a Power Base version. You can mount, use and charge your battery pack
while it’s stored in your lathe base. |
|
| And For The Best Cuts
Possible. . . |
|
| Part No |
Description |
List Price |
| Cobra
Power Base Conversion Kits |
| 2110 |
Pro Com (Modified) Power Base
Conversion Kit |
$ 49.95 |
| 2111 |
Stock Com (Stock) Power Base
Conversion Kit |
$ 49.95 |
| Cobra
Diamond Cutting Tools |
| 2000D |
Diamond Cutting Tool |
$ 85.00 |
- Developed in the aerospace Industry
specifically for cutting Coms.
- Increases tool life
- Doesn’t blow off Commutator
- Creates better cuts.
|
And To
Assure Perfect
Cuts Every Time...
 |
| Part No |
Description |
List Price |
| Cobra Com
Cutting Fluid |
| 40002 |
Com Cutting Fluid |
$ 5.95 |
|
